- Designed for Pb and LiFePO4 batteries
- Adaptive and dynamic charge algorithm and monitoring algorithm
- Optimised usability
- Extensive protection and self-protection functions
- Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash programming)
- Suitable for lead acid, gel, AGM, fleece and lithium-ion batteries
- Extensive protection functions and self-protection functions
- Short circuit and reverse polarity protection
- Electrical safety – certifications: EN60335, EN61010, UL1236
- Utilized and approved by well known automotive manufacturers
- 100% on board safety, protection of
on-board electronical system / airbag - Suitable for lead acid, gel, AGM, fleece and lithium-ion batteries
- Use as battery charger and power supply
- Extensive protection functions and self-protection functions
- Short circuit and reverse polarity protection
- Protection against defective batteries
- Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during
diagnosis / flash programming) - Extensive protection functions and self-protection functions
- Short circuit and reverse polarity protection
- Electrical safety: EN61010-1, EN60335-1, EN60335-2-29
- Certifications: UL60950-1, CSA C22.2 No.60950-1-07
- Utilized and approved by well known automotive manufacturers
- Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during
diagnosis / flash programming) - Extensive protection functions and self-protection functions
- Short circuit and reverse polarity protection
- Electrical safety: EN61010-1, EN60335-1, EN60335-2-29
- Certifications: UL60950-1, CSA C22.2 No.60950-1-07
- Utilized and approved by well known automotive manufacturers
- Extensive protection functions and self-protection functions
- 100% qualified for motor vehicles on-board electronic system / airbag
- Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash programming)
- Electrical safety – certifications: EN60335, EN61010, UL1236
- No inrush current – optimized for use within industrial manufacturing lines
- 100% qualified for motor vehicles on-board electronic system / airbag
- Use as battery charger, power supply and motor vehicles energy supply in
buffer mode (support during diagnosis / flash programming) - Electrical safety – certifications: EN60335-1, EN60335-2-29, EN61010, EN62233, UL1236
- No inrush current – optimized for use within industrial manufacturing lines
- 100% qualified for motor vehicles on-board electronic system / airbag
- Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash programming)
- Electrical safety – certifications: EN60335-1, EN60335-2-29, EN61010, EN62233, UL1236
- No inrush current – optimized for use within industrial manufacturing lines
- 100% qualified for motor vehicles on-board electronic system / airbag
- Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash programming)
- Electrical safety – certifications: EN60335-1, EN60335-2-29, EN61010, EN62233, UL1236
- 100% qualified for motor vehicles on-board electronic system / airbag
- Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash programming)
- Extensive protection functions and self-protection functions
- Short circuit and reverse polarity protection
- Automatic detection of the number of cells of the battery module
- Identification of a battery module on different resistance encodings
- Single cell voltage monitoring
- Cell temperature monitoring
- Detection of defect cells
- Ensuring an uninterrupted power supply in the industrial plant area, with simultaneous downtime reduction
- Backup solution to avoid delays in the industrial environment
- Mobile loading unit enables flexible supply in vehicle fleets or in rework stations
- Flexible use in the context of continuous improvement processes or short-term adaptations
- Autonomous battery system with internal BMS (single cell monitoring) and emergency stop
- Flexible use
- Charging AC type 2, 11-22kW
- Robust construction (metal housing, IP54)
- Powerful quick loader in compact design
- Battery voltage indicator for 12VDC lead acid vehicle batteries
- Robust construction, compact housing
- Easy mounting on the windshield of the vehicle using suction cup
- Extremely low power consumption
- Solar module with integrated charge controller for 12VDC lead-based rechargeable batteries
- Processor controlled charging
- Robust solar module
- Aluminium / plastic sandwich carrier plate
- Only 5 mm thick (without charge controller)
- Transport system (without charger)
For one battery charger (standard version)
Type: MPC4 (f.e. DBL1600) - Dimensions transport system (HxWxD): 100(202)x51x62 cm
- Transport system for B-Housing version
(without charger)
Typ 1 for one charger
- Without accessories
- Transport system with mounting device for two DBL in B housing and signal lamps (incl. cable drum 25 m)
- Transport system with mounting device for two DBL2250/3W resp. DBL3000/3W and signal lamps
- Transport system with mounting device for D-IBM2900 energy buffer system as well as two DBL/3W or -B and signal lamps
- Wallmount with cable bracket incl. mounting and fastening materials for DBL series in B-Housing Version
- Basic carrier for DBL MPC4 chargers, B-Housing Version
- Incl. EU socket combination – not mounted!
- Other socket combination on request
- Adaptive filter box to meet ILA EMC requirement on DBL devices
- Retrofittable on existing DBL devices
- Suitable for DBL1050-14, DBL1200-14 and DBL1600-14
- For clear signaling of the charging status on production lines and workshops
- External signal lamp for charging computers
- Type: MPC4 (f.e. DBL1600)
- D-ADAPT-SBB2X25 T-Adapter
The T-Adapter enables the utilisation of the further functions of the 25 pole DBL interface while at the same time the external signal lamp (DBL-SIG-LR) is connected to the DBL.
Type: MPC4 (f.e. DBL1600) - D-ADAPT-SB25 Data Cable
Data cable male-female, 25 pole / 1.8 m
- Mains cable for Europe
- Mains cable for USA
- Mains cable for Australia
- Mains cable for United Kingdom
- Mains cables international (4 set)
- Mains cables international (3 set)
- Charging cable
16 mm² / 100 m reel
Cable for battery charger - Standard
- Standard variants
- Charging cable for Smartcharger SC300/SC500
- Cable clamps 200A
Completely isolated
For professional applications
Standard red and black - Set angled
red and black
- Charging cable coupling
- Welding connector
- Welding plug/Charging cable coupling set
- Software for fast and easy update of customer-specific firmware (including parameter) via RS232 or USB. Link available via e-mail.
- For PC-based parameterization of DBL MPC4 charging computers and configuration of D-ADAPT-MPC4 network adapter via RS232/USB or Ethernet
Applications Charging Technology
