EMC Engineering

Electronic devices have to run properly, be secure and safe from interferences. They should neither influence other devices during the operation nor cause inadmissible circuit feedback. To be able to ensure this in the research and development processes, Deutronic has an in-house EMC test laboratory (electromagnetic compatibility). The laboratory with its consulting and proposed solutions is used together with local partners.

EMV Labor 01 3 - EMC Test Laboratory

Proposed solutions for interference suppressions with its know-how from our development of power electronics.

  • EMC tests
  • CE – conformity tests
  • EMC testing during development
  • EMC advisory service
  • Proposed solutions for interference suppression

Conversion on site with merchantable standard components and specially made assemblies from our in-house electronics manufacturing.

Electromagnetic interference emissions

Specific to its performance

emv01 300x211 - EMC Test LaboratoryEN61000-3-2Harmonic currents of devices with an input current per conductor of 16A.up to 50th orderAnalysis of current harmonics on the power input of the test item, with energization from a common voltage source.
EN55011Radio interferences of industrial, scientific and medical HF devices.9kHz – 30MHzAn artificial mains network decouples the superimposed interference voltage of the test item’s supply line.

Emitted

emv02 300x211 - EMC Test LaboratoryEN55011Radio interferences of industrial, scientific and medical HF devices.30MHz – 1GHzMeasuring of the test items emitted intense of its interference field by an antenna.

Interference immunity

Specific to its performance

emv03 300x211 - EMC Test LaboratoryEN61000-4-4Interference immunity to rapid transients (Burst high-frequency sequences).4kV 5/50ns impulses  variable frequenciesSimulation of high-frequency impulses like they arise when switching relays (contact bounce). Coupling of impulses into the test item’s supply line.
emv04 300x211 - EMC Test LaboratoryEN61000-4-5Interference immunity to impulse voltage (Surge: high energetic impulses).4kV 1,2/50μs impulsesSimulation of impulse voltages which are caused due to lightning to overhead power lines or due to the switching of large inductances. Coupling of impulses into the test item’s supply line.
emv05 300x211 - EMC Test LaboratoryEN61000-4-6Interference immunity to conducted disturbances which are induced by HF fields.40Veff. 150kHz-230MHz 80%AM (1kHz)With coupling and decoupling networks the amplitude modulated sinus oscillations (80%AM, 1kHz carrier frequency) are coupled into the test item’s supply line.
emv06 300x211 - EMC Test LaboratoryEN61000-4-11Interference immunity to voltage drops, voltage fluctuations and brief interruptions (Dips).0-100% Dips 0-30000ms variable phase angles.Voltage dips, voltage fluctuations and short-time power failures are generated with a test generator in the test item’s supply line.

Irradiated

emv07 300x211 - EMC Test LaboratoryEN61000-4-3Interference immunity to high-frequency electromagnetic fields.10V/m (20V/m) 80MHz-1GHz 80%AM(1kHz)In the absorber hall amplitude modulated sinus oscillations (80%AM, 1kHz carrier frequency) are irradiated to the test item by an antenna.

Electrostatic

emv08 300x211 - EMC Test LaboratoryEN61000-4-2Interference immunity to electrostatic discharging (ESD)16kV air 8kV relaisSimulation of the discharge from electrostatically charged items regarding the test item and people. The electrostatically discharge can also influence objects next to the test item.
EMV Labour - EMC Test Laboratory

Laboratory equipment:

  • Absorber hall (Frankonia) with ferrite plates and pyramid absorbers (shielding up to 18GHz and freedom of reflection); dimensions: 7.35x3.75x3.30m / door: 1.19x1.95m
  • Shielding cabin (S+M Components); dimensions: 4.00x3.70x2.55m / door: 0.90x2.05m
  • Measuring receiver (Rohde & Schwarz, PMM, Schwarzbeck)
  • Spectrum analyzer (Anritsu)
  • HF amplifier (Amplifier Research: 2 pieces)
  • E-field sensor (PMM)
  • Signal generator (Farnell)
  • Millivoltmeter (Rohde & Schwarz)
  • Compact simulator (EMC-Partner): Dips, Burst, Surge
  • ESD-Simulator (EM-Test)
  • Power supplies (AC and DC), batteries
  • Capacitative coupling clamp, inductive coupling clamp, coupling and decoupling networks, antennas, artificial mains network (LISN), interference suppression material
  • Video monitoring of the equipment under test (EUT)
  • Material and components for debugging

Good hourly rates – ask for our price list!

Latest news

HMI 2018 Messestand - The HMI 2018 is all about electro mobility for Deutronic

The HMI 2018 is all about electro mobility for Deutronic

The Hannover Messe 2018 is all about electro mobility for Deutronic. The main attractions are test systems for stators, rotors and power electronics for electric drive engines. Furthermore, a new generation of extremely compact and powerful vehicle...
DBLW freigestellt - DBLW: Battery Charger for use in showrooms and workshops

DBLW: Battery Charger for use in showrooms and workshops

Available soon: The Deutronic DBLW Series is designed for charging and maintenance of lead-acid based and LiFePO4 batteries. With its adaptive charging and maintenance algorithm the charger is perfect for use in automotive showrooms and workshops. The...
inko - InKoLeZ – Inductive components for future power electronics

InKoLeZ – Inductive components for future power electronics

We are a member in the research project InKoLeZ – Inductive components for the future power electronics. Together, with our three partners AVL Timerics, SUMIDA Components & Modules GmbH and the Frauenhofer IISB we are researching and...
neubau - Constructing our new third company building

Constructing our new third company building

Due to the high growth of our company within the last few years we have been working at the limits of our present capacity at our existing building. The architecture blends into its surroundings perfectly. The move...

Trade fairs & events

LogiMAT2018 Logo RGB - LogiMAT

LogiMAT

13. - 15. March 2018
Stuttgart
firstcontact - firstcontact

firstcontact

10. April 2018
FH Deggendorf
skb - SKB Landshut

SKB Landshut

18. April 2018
Messegelände / Sparkassenarena Landshut
hannover messe - Hannover Messe

Hannover Messe

23.-27. April 2018
Hannover

BMW Las Vegas

1. - 3. Mai 2018
Las Vegas
coilwinding - CWIEME

CWIEME

19.-21. Juni 2018
Berlin
automechanika - automechanika

automechanika

11.-15. September 2018
Frankfurt
electronica logo - electronica

electronica

13.-16. November 2018
München
SPS 2018 LOGOKOMBI OT D RGB - SPS

SPS

27.-29. November 2018
Nuremberg